Pull the part parallel may broke the joint part
Please follow the below step to remove the joint safely
■Example 1. Keep the joint part on the back hair part, and remove the right twin tail
1. Remove parts around
2. Turn the joint part as L
3. Hold the joint part and pull the part which want to be removed
■Example2. Keep the joint part on the upper arm part, and remove the fore arm
1. Turn the joint part as L
2. Hold the joint part and pull the part which want to be removed
■Caution
Using pliers while remove the joint may cause damage to the joint part. Please cover the joint part with a fabric while using it
■For PVC product
Heating up the holes with a hair dryer would make them easier to fit as the heat will soften the PVC material, thereby allowing easier assembly.
Over heat may cause deformation on the part or a burn. Please be careful on it.